After taking all the preparatory measures before starting, round off the edges and corners of the cut surface, check the instrument on the operating panel, pre-adjust the tension force, turn on the cooling water, and alert others. The starting step of diamond wire saw machine is to start the main motor to rotate the flywheel to drive the diamond wire saw, and then to turn on the diamond wire saw machine for cutting.
First of all, start the main motor, adjust the speed of the main motor from zero speed to the required speed value, and then start thediamond wire saw machine for walking after the diamond wire saw line speed is appropriate. The walking speed of the diamond wire saw machine is gradually increased from slow until the diamond wire saw cutting is normal and stable. At the same time, the current indicating value of the main motor is observed to be normal, and then the walking speed of the diamond wire saw machine can be maintained for normal cutting operations.
There is a company that has a lot of technology and experience, TOOLWITS, which has 14-year experience in producing quarry machines, as well as diamond tools for stone, concrete, ceramic and so on, is able to give customers the maximum technical support, must be the most ideal purchasing object.
